Skip to content
Printed in Houston, Texas US shipping · Free local pickup
LongHorn PrintMy accountCart

FREE PRINT TOOL

Decal Size & Surface Fit Calculator

Measure a usable rectangular area on your actual item, then enter your artwork proportions. See the largest proportional design that fits without stretching. The result is a geometry estimate, not a promise that a transfer will conform or adhere to every surface.

Free to use · No account required

TRY YOUR DIMENSIONS

Decal Size & Surface Fit Calculator

Use the worked examples below while JavaScript is unavailable. To use the interactive calculator, enable JavaScript in your browser.

Measure a usable area on the actual item

Use a ruler and a paper test to identify a region clear of handles, rims, seams and sharp curves. Enter its width and height in the same unit. For a logo, measure only the region the design should occupy; a cup’s fluid capacity is not a print dimension.

The edge clearance is your chosen spacing inside each of the four edges. A clearance of 0.125 in on each side removes 0.25 in from the usable width and 0.25 in from the usable height. It is a planning allowance you choose, not a universal production requirement.

Worked examples: the shape changes the fitting size

Artwork dimensions describe its aspect ratio. You can use pixels from the original file or matching units from the design, but do not mix units between its width and height. The calculator preserves that ratio; it does not edit the file or judge image sharpness.

Measured areaArtwork ratio and clearanceLargest proportional design
3 in wide × 2 in highSquare (1:1), no clearance2 × 2 in
3 in wide × 2 in highWide logo (2:1), no clearance3 × 1.5 in
3 in wide × 2 in highSquare, 0.125 in at each edge1.75 × 1.75 in
7.62 cm wide × 5.08 cm highWide logo (2:1), no clearance7.62 × 3.81 cm (3 × 1.5 in)

A rectangle does not prove a wrap will fit

A curved or tapered item needs a physical test. Check the circumference at several heights; a rectangular design can wrinkle or overlap unevenly if those measurements differ. For a difficult shape, try a smaller separate logo rather than assuming a full wrap will work.

This tool does not certify adhesion, dishwasher resistance, food contact or suitability for a particular coating. Confirm the actual blank and application process before a larger order.

Choose the print product after the paper test

UV DTF is transfer film for compatible smooth hard surfaces; it does not include the cup. Die-cut vinyl is a conventional adhesive sticker. If you need a finished printed glass can cup, choose that separate product.

The calculated dimensions describe artwork fit, not guaranteed catalog availability. Select an offered print size that suits the measured area and review the actual preview and price. This calculator does not upload files, reserve a size, add to cart or quote production.

Common questions

Will a 3 × 3 inch decal fit every 16 oz cup?

No. Measure the actual usable width, height and surface shape. Cup capacity does not define those measurements. A square logo must fit within both dimensions.

Does the calculator stretch my artwork?

No. It uses the width-to-height ratio to calculate a proportional rectangle. The original file stays unchanged.

Can I use this for a garment transfer?

The rectangle math also applies to flat placements, but this guide’s application examples are for hard-surface decals. Garment DTF is a different print process; choose the correct product and check its garment-specific print area.

YOUR NEXT STEP

See your artwork on the real order preview.

Create peel and stick UV DTF designs for smooth, hard surfaces. No heat press is needed.

Calculate my decal size

PRINTED IN HOUSTON

Have a question before you print?

11500 S Main St #126 · Houston, TX, 77025. Free local pickup; wait for your pickup-ready confirmation, then pick up within 72 hours. Orders not picked up within 72 hours are discarded.

Custom UV StickersCalculate my decal size